Triple Pump Hydrophore

- Our products comply with TS EN 733 standards.
- Temperature range of the liquid: 20 - 60⁰C
- Temperature range of the liquid: 20 - 60⁰C
- Operating Ambient temperature up to 40⁰C
- Max. suction head up to 8 m
- Max. head up to 170 m
- Body Pressure (Pmax) 10-16-25 bar
- Sequential operation according to water need.
- Pump replacement after each operation.
- Pumps stop when there is no water in the suction.
- Delay during start-up of the 2nd and 3rd pumps.
- Delay during deactivation of the 2nd and 3rd pumps.
- Ability to read the interphase voltage from the screen on the microprocessor unit.
- The fault can be read via the microprocessor.
- All operating statuses can be seen on the control panel.
- Additionally, there is an additional manual operation switch on the side surface of the panel. (For models above 5.5 kW)

- Standard type B'5 flange, 2-pole, three-phase, 50 Hz [2900 rpm] electric motor.
- Insulation Class: F | Protection Class: IP 55

- Suction and discharge collector.
- Full bore ball valves.
- Silent operating missile type check valve.
- Level floater with 5 Mt cable that prevents operation without water.
- Control panels with high-equipped sequence changer feature, P.01 up to 5.5 kW, Y/D starting for 7.5 KW and above, mounted on the chassis.
- Anti-vibration elastic wedges